[bsnake2]

Just finished installing the twin sticks from JB Custom Fabrication. Excellent product, pretty good instructions. The only things I could gripe about and the're small things are the boot quality and the thin stainless hold down ring. I cut a piece of 1/4" aluminum for better holding.

Want to cut some off those aluminum hold down rings for us? :toothless

 

[bsnake2]

The blue is the original colour but as parts rotted before making it a summer toy I had various colours. The flat black was a short term solution but I like it so much I might do it again when it's pulled apart.

What flat black (brand) did you use? Did you rattle can it or spray?

 

[bsnake2]

The paint was sprayed, it's PX8 2 part with the clear mixed 1/1 with deadner. The flames I found on the net, you pick the style and size and they run off the peel and stick stencil. Once in the paint booth just line it up and peel the center part and spray, with time being money it's a cheap alternative. The flames are the same paint without the deadner.

It's getting dark but I got a couple shots of the motor;


The rusty panel is the access plate to the nitrous purge fitting in the cowl, looking at the pic reminds me I need to clean that up, LOL


The tank on the rad is an overflow tank for the power steering. The March billet pump assembly needs help to work with bigger tires.


The filter is for the tranny, the little plate on the fender is the electronic controller for the electric fan.

WOW that is a sweet ride! You must be proud of her.