Bronco Forum - Full Size Ford Bronco Forum banner

1 - 11 of 11 Posts

·
FSB warrior
Joined
·
6,118 Posts
Discussion Starter #1
After running over the package for signs of explosives, and noteing the shape of the box and fact that it said SUMMIT on the side and I was expecting a Summit shipment soon I opened it up and was shocked to find this inside.....





Summit is the only place I could find them. 163 bucks for 925 CCAs of dry cell power!!


in such a small package. They make a 680 in 3x6x5

 

·
TTB Hater of course
Joined
·
3,100 Posts
Hell yes.

Optima can kiss my a................... well, let's just say Optima can do a lot of things I won't say here
 

·
Screw the Jeep Thing
Joined
·
4,522 Posts
So can you use those in place of a regular starting battery? Hell I'd go for that if they held a charge longer then the regular ones.
 

·
Cadillac of Men
Joined
·
3,787 Posts
alot wider in ratio to length than normal, but still nice. good for a dual batt setup when you have to put both on one inner fender.
 

·
FSB warrior
Joined
·
6,118 Posts
Discussion Starter #8
Bronco85 said:
So can you use those in place of a regular starting battery? Hell I'd go for that if they held a charge longer then the regular ones.
Yup you can. They make at least 3 different ones us wheelers are intersted in. A 680 that is exactly half the size, A 1200 thats more like normal battery width (even mine is like 1" wider, thats it) and mine, the 925.

And no Damager you just have to go to the mall at 8 at night to pick up the CD....
 

·
FSB warrior
Joined
·
6,118 Posts
Discussion Starter #10
if your normal tray was 12" long yes you can mount at least 3 of the 680CCA ones in a normal tray.
 

·
Registered
Joined
·
1,023 Posts
Or just get the PC1200. It's got a 156min reserve, is 7"x7"x13"

It's $300, but figure that it will replace two normal batteries.
 
1 - 11 of 11 Posts
Top