Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
70 Posts
On the backside of the steering wheel there should be two screws. They are at an odd angle so take care to to strip the heads. Remove the screws and take the front cover/horn switch assembly out of the way. That will reveal the bolt that holds the wheel to the steering shaft. If that is not loose then something is mucked up in the tilt mechanism.

Reply back with results :)

Kyle
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top