[BigBlue 94]

Junkyards in KC are full of em... There is a 3 day weekend coming up and its only 7 hours from the twin cities.

I could offer to pull one but shipping would be killer, plus my labor and the cost. And it will be a few weeks before i could get up there. Shipping alone would be 400 probably.

 

[KyleQ]

Junkyards in KC are full of em... There is a 3 day weekend coming up and its only 7 hours from the twin cities.

I could offer to pull one but shipping would be killer, plus my labor and the cost. And it will be a few weeks before i could get up there. Shipping alone would be 400 probably.

Hmm.. those parts would fit in the back of my 2DR Focus coupe. I did some more looking at the DJM kit and I realize I only need the arms and the knuckles. The beams are part of the kit and the radius arm mount on the frame side is the same for 2x4 and 4x4. I might not need what I thought I needed... Hmm - more thinking required.

Thanks!

 

[BigBlue 94]

Hmm.. those parts would fit in the back of my 2DR Focus coupe. I did some more looking at the DJM kit and I realize I only need the arms and the knuckles. The beams are part of the kit and the radius arm mount on the frame side is the same for 2x4 and 4x4. I might not need what I thought I needed... Hmm - more thinking required.

Thanks!

Some more food for thought, econolines use the same coil spring and have a very similar Twin I beam setup.

 

[KyleQ]

Some more food for thought, econolines use the same coil spring and have a very similar Twin I beam setup.

I think I only actually need the knuckles. I looked, new stuff was cheaper than I expected - I'll call a yard for the knuckles that happens to be fairly close. This may have been easier than I thought.

 

[KyleQ]

Knuckles ordered, I'll just buy everything I need. #firstworldproblems.

I guess this was easier than I thought, now to order that DJM lowering kit... ouch!