Chances are it is either 3.55 or 3.73... I have really never seen anything lower than 3.73's in stock rears

 

Chances are it is either 3.55 or 3.73... I have really never seen anything lower than 3.73's in stock rears

:scratchhe
Well you aint been around long enough. Because fords didn't put 3.73's into our rigs.

The answer your looking for AV is 3.55 in the rear, and 3.54's in the front STOCK.

Axle code will either be 19 (open carrier 3.55), or H9 (limited slip 3.55). These codes will be on the manufacture sticker on the drivers door jam under axle code.

 

check your axle tag on the inside of the door, then google it

 

If you can get me the VIN# I can probably tell you. Just looked at the listing for a 95 Bronco and nothing listed higher than a 3.55

 

Jack up one wheel, count how many driveshaft rotations it takes to turn the wheel one turn. Should be with both wheels up, when one is up, you need to do the math.

 

Is there no tag on the axle itself? That would be the easiest way to find out.

 

He doesnt have the Bronco yet, and he's trying to repair/modify it already.

 

Thanks guys, just collecting parts. 3.55 is perfect. Again will check the tag when I get it to make sure. Just wanted an educated guess.